RTV-2 High Transparent 50 Shore a Electronic Potting Silicone Rubber
RTV-2 high transparent 50 Shore A electronic potting silicone rubber Electronic potting compound is a kind of two components(1:1 mixing ratio) addition cure silicone with the characteristics of heat-conducting , low viscosity , inherent flame resistance ,waterproofing ,etc.It can cure both at room t......
Send Inquiry
Product Description
RTV-2 high transparent 50 Shore A electronic potting silicone rubber
Electronic potting compound is a kind of two components(1:1 mixing ratio) addition cure silicone with the characteristics of heat-conducting , low viscosity , inherent flame resistance ,waterproofing ,etc.
It can cure both at room temperature and heated temperature and the curing time can be accelerated by higher temperaturer .
Application of electronic potting compound :
1.Applying for the surface of PC,PP,ABS,PVC,Metal ,etc.
2.High powered electronic encapsulation and DC/DC module and circuit board which requires heat dissipation and high
temperature resistance
3.Insulation ,waterproof and bonding of general electronic components
4.Filling for LED, LCD electronic display ,circuit board ,PCB substrate ,etc
5.Outdoor protection for LED screen.
Product data sheet :
Properties index | Part A | Part B | |
Before Curing
| Appearance | Transparent fluid | Colorless/yellowish fluid |
Viscosity(cps) | 2500±500 | - | |
Features when operation | Mixing Ratio(By weight) | 1:1 | |
Operating Time(25°C /min) | 20~30 | ||
Curing time(hr,basically cured) | 3 | ||
Curing time(hr,perfectly cured) | 24 | ||
Hardness(shore A) | 50±2 | ||
After Curing | Thermal Conductivity[W(m·K)] | ≥0.2 | |
Dielectric Strength(kV/mm) | ≥25 | ||
Dielectric permittivity(1.2MHz) | 3.0~3.3 | ||
Volume resistivity(Ω·cm) | ≥1.0×1016 | ||
Fire Resistance | 94-V1 | ||
(Pls note: the above data for this product in 25 °C temperature, 55 percent humidity conditions, for reference. The accurate data is measured by customers to when using.)
Shelf life for Platinum cure liquid silicone for chocolate mold
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for Platinum cure liquid silicone for chocolate mold
20kg/drum for part A+ 20kg/drum for part B in one set
Call Us Anytime With Questions About Your Application.
More information , pls feel free to contact Ms Mickey:
Web:wendy-rl.en.made-in-china.com
